{"title":"Levinson — 991 911 (2012-2019) — Control Arms \u0026 Links","description":"\u003cp\u003eLevinson Performance control arms \u0026amp; links for Porsche 991 911 (2012-2019). Check each product for exact model and equipment compatibility.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/991-911\"\u003eAll Levinson products for this chassis\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"oem-gt3-style-lower-control-arms-for-most-1997-present-911-cayman-boxster-718","title":"Porsche OEM GT3-Style Lower Control Arms — Pair","description":"\u003ch2\u003e\u003cb\u003eOEM GT3 Adjustable Lower Control Arm Set\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eA factory-style solution for increased alignment range without moving to full race control arm assemblies.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cb\u003eFront or rear on applicable Porsche models; see the chassis and model-year applications below.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eDerived from Porsche GT3 suspension architecture, these adjustable lower control arms provide expanded front axle camber capability while retaining OEM design integrity, durability, and ride compliance.\u003c\/p\u003e\n\u003ch4 class=\"p3\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNote: \u003cspan style=\"color: rgb(0, 0, 0);\"\u003ethese are sold as a left+right pair and are supplied complete with all ancillary parts - $1100 value elsewhere.\u003c\/span\u003e \u003cspan style=\"text-decoration: underline;\"\u003eGet all parts shown at one price.\u003c\/span\u003e\u003c\/span\u003e\u003cem\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/em\u003eOne pair serves one axle. On applications using these arms at both axles, two pairs cover front and rear. Our 991 and 992 applications are front-only.\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp class=\"p3\"\u003eThe two-piece shim-adjustable arm design allows precise camber tuning for track or performance street applications while improving front-end grip, steering precision, and tire contact control under load. Additional negative camber is built into the arm geometry before shim adjustment, with further correction of ±2 degrees available through the included shim packs.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eForged aluminum arm bodies combine low unsprung mass with high structural rigidity, while OEM-style elastomer bushings preserve isolation and service life appropriate for road and dual-purpose use.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKit Includes\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eLeft and right OEM GT3-type lower control arms (one complete pair)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eInner bushing sections\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eComplete camber shim sets (1mm, 1.5mm, 3mm, 7mm) for each arm (8 shims total)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eLitronic headlamp correction brackets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eThrust arm spacers for applicable chassis\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eCaster-adjustable thrust arm bushings\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eInstallation hardware (4X double-ended studs, 8mm spacers, locking nuts)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNO EXTRA PARTS TO BUY\u003c\/strong\u003e\u003c\/span\u003e - all required ancillary components are included.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003e\u003cbr\u003eTechnical Features\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eReplaces these OE Porsche part numbers:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e996-341-121-90\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e996-341-122-90\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e•\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e996-341-441-90\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eGT3 Shim Adjustment System\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eAllows repeatable camber adjustment through calibrated shim changes rather than eccentric-only adjustment.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eIncreased Static Negative Camber\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eProvides additional front or rear axle camber relative to standard non-GT control arms, improving turn-in and outer shoulder support under cornering load.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eForged OEM Construction\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eHigh-strength forged aluminum construction designed for motorsport-derived loading while maintaining factory serviceability.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003e\u003cspan class=\"s2\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eGeometry Correction for Lowered Cars\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eParticularly beneficial where ride height changes have reduced available alignment range.\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cb\u003eOEM Ride and NVH Characteristics\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eRetains compliant bushing behavior absent the noise, harshness, and maintenance associated with spherical-bearing race arms.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eChassis \/ Model Applications\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eApplications by U.S. model year:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e986 Boxster — 1997–2004 — front or rear\u003c\/li\u003e\n\u003cli\u003e996 Carrera \/ Turbo families — 1999–2005 — front or rear; model-dependent\u003c\/li\u003e\n\u003cli\u003e997 Carrera \/ C4 \/ Turbo families — 2005–2013 — front or rear; model-dependent\u003c\/li\u003e\n\u003cli\u003e987 Boxster — 2005–2012 — front or rear\u003c\/li\u003e\n\u003cli\u003e987 Cayman — 2006–2012 — front or rear\u003c\/li\u003e\n\u003cli\u003e981 Boxster — 2013–2016 — front or rear\u003c\/li\u003e\n\u003cli\u003e981 Cayman — 2014–2016 — front or rear\u003c\/li\u003e\n\u003cli\u003e991 911 — 2012–2019 — front only\u003c\/li\u003e\n\u003cli\u003e718 Boxster \/ Cayman (982) — 2017 onward — front or rear\u003c\/li\u003e\n\u003cli\u003e992 Carrera — 2020 onward — front only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eU.S. model years shown. Year ranges cover each model family and do not mean every trim was offered in every year. Confirm your exact chassis, trim and axle with LPM, including GT variants and vehicles from other markets. Use the included spacer set where required for the application; 991 and 992 applications are front-only.\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eNotes\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eAlignment required after installation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eLitronic brackets included only to be used for vehicles equipped with factory headlamp leveling systems.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp class=\"p1\"\u003eThrust arm spacers included - not necessary to use in all applications.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Levinson Performance \u0026 Mfg.","offers":[{"title":"Default Title","offer_id":52964564140354,"sku":null,"price":589.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/LCA_1.jpg?v=1777055149"},{"product_id":"362-front-lca-litronic-bracket-x-2","title":"362 Front LCA Litronic Bracket x 2","description":"\u003cp\u003eRSS 362 brackets connect Litronic, PASM, or torque-vectoring sensors to RSS Tarmac Series lower control arms. This listing contains two front brackets.\u003c\/p\u003e\u003cp\u003eDepending on the Porsche model and equipment, additional sensor brackets may be required. Consult the fitment guide and torque-specification image in the gallery before ordering.\u003c\/p\u003e\u003cp\u003eRSS component part number: 362. Pair\/set SKU: 362-2.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-362-2-3.jpg?v=1789757394\" alt=\"RSS lower control arm sensor-bracket fitment guide\"\u003e\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205395231042,"sku":"362-2","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-362-2-1.jpg?v=1789757380"},{"product_id":"30178-14-bearing-dust-boot-set-of-14","title":"30178-14 Bearing Dust Boot Set of 14","description":"\u003cp\u003eA 14-piece set of RSS dust boots for rod-end bearings. The boots shield the bearings from weather and contamination to help extend service life.\u003c\/p\u003e\u003cp\u003eCompatible with RSS toe-steer, bump-steer, rear upper-link, and drop-link kits. Compatibility is with the RSS bearing\/link hardware; these are not a universal replacement for factory suspension boots.\u003c\/p\u003e\u003cp\u003eManufacturer part number: 30178-14.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 718, 981, 991. Service-part fitment is to the compatible RSS assembly and sensor equipment, not every factory part on these chassis.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205395427650,"sku":"30178-14","price":154.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-30178-14-1.webp?v=1789757404"},{"product_id":"30178-8-bearing-dust-boot-set-of-8","title":"30178-8 Bearing Dust Boot Set of 8","description":"\u003cp\u003eEight RSS rod-end bearing dust boots. Protects compatible RSS toe-steer, bump-steer, rear upper-link and drop-link bearings from weather and contamination.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30178-8. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor the specified RSS suspension hardware on 986, 987, 996 and 997. RSS lists these chassis for compatible 370 front toe\/bump-steer or 312 rear toe-link kits; this service item fits those RSS assemblies, not every factory suspension.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 718, 981, 991. Service-part fitment is to the compatible RSS assembly and sensor equipment, not every factory part on these chassis.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205676413250,"sku":"30178-8","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-30178-8-1.jpg?v=1789758764"},{"product_id":"30178-4-bearing-dust-boot-set-of-4","title":"30178-4 Bearing Dust Boot Set of 4","description":"\u003cp\u003eFour RSS rod-end bearing dust boots. Protects compatible RSS toe-steer, bump-steer, rear upper-link and drop-link bearings from weather and contamination.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30178-4. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor the specified RSS suspension hardware on 986, 987, 996 and 997. RSS lists these chassis for compatible 370 front toe\/bump-steer or 312 rear toe-link kits; this service item fits those RSS assemblies, not every factory suspension.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 718, 981, 991. Service-part fitment is to the compatible RSS assembly and sensor equipment, not every factory part on these chassis.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205676446018,"sku":"30178-4","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-30178-4-2.webp?v=1789758771"},{"product_id":"30178-2-bearing-dust-boot-set-of-2","title":"30178-2 - Bearing Dust Boot Set of 2","description":"\u003cp\u003eTwo RSS rod-end bearing dust boots. Protects compatible RSS toe-steer, bump-steer, rear upper-link and drop-link bearings from weather and contamination.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30178-2. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor the specified RSS suspension hardware on 986, 987, 996 and 997. RSS lists these chassis for compatible 370 front toe\/bump-steer or 312 rear toe-link kits; this service item fits those RSS assemblies, not every factory suspension.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 718, 981, 991. Service-part fitment is to the compatible RSS assembly and sensor equipment, not every factory part on these chassis.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205676544322,"sku":"30178-2","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-30178-2-3.jpg?v=1789758778"},{"product_id":"30179-service-replacement-part-rod-end-bearing-front-toe-bump-steer-kit-370-371","title":"30179 - Service Replacement Part - Rod End Bearing - Front Toe\/Bump Steer Kit - 370\/371","description":"\u003cp\u003eReplacement rod-end bearing for RSS front toe\/bump-steer kits 370 and 371. Optional protective dust boot available.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30179. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor the specified RSS suspension hardware on 986, 987, 996 and 997. RSS lists these chassis for compatible 370 front toe\/bump-steer or 312 rear toe-link kits; this service item fits those RSS assemblies, not every factory suspension.\u003c\/p\u003e\u003ch3\u003eOptional Add-ons\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e30178 — Bearing dust boot: +$11.00\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAdd-ons are included only when selected. Match each accessory to the vehicle and installed hardware.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 991. Service-part fitment is to the compatible RSS assembly and sensor equipment, not every factory part on these chassis.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"None","offer_id":56205680181570,"sku":"30179","price":75.0,"currency_code":"USD","in_stock":true},{"title":"30178","offer_id":56205680214338,"sku":"30179 + 30178","price":86.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-30179-30.jpg?v=1789759100"},{"product_id":"3-379-rss-lca-outer-arm-large-end-bolt-on-replacement-kit","title":"3-379 RSS LCA Outer Arm (Large End) - Bolt On - Replacement Kit","description":"\u003cp\u003ePreassembled RSS lower-control-arm outer section for bolt-on replacement. Contains one outer arm, one bearing kit and one ball-joint kit. Connects to the compatible inner monoball arm assembly.\u003c\/p\u003e\u003cp\u003eSupplier part number: 3-379. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this product in its 987 and 997 GT3\/RS\/GT2, Turbo, and C2\/C4\/GTS catalogs. Match the required mounting hardware and exact vehicle and equipment specification before ordering. Service-part fitment is to the specified RSS assembly, not to every factory suspension on that chassis.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 986, 991, 996. Service-part fitment is to the compatible RSS assembly and sensor equipment, not every factory part on these chassis.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205696696642,"sku":"3-379","price":570.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-3-379-39.webp?v=1789759205"},{"product_id":"323-thrust-arm-bushing-puck-non-castor-adjustable-front-axle","title":"323 Thrust Arm Bushing\/Puck - Non Caster Adjustable - Front Axle","description":"\u003cp\u003eFour non-adjustable front thrust-arm bushings, suited to caster\/length-adjustable thrust arms. Intended to reduce unwanted caster changes under acceleration and deceleration.\u003c\/p\u003e\u003cp\u003eRSS lists 987, 997 non-GT applications, 981\/GT4, and 991 including GT3\/RS. Confirm the exact arm and bushing configuration.\u003c\/p\u003e\u003cp\u003eSupplier part number: 323. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS explicitly references these covered chassis: 987, 997, 981, 991. Exact axle, trim and installed-hardware restrictions in the description still apply.\u003c\/p\u003e\u003ch3\u003eOptional Add-ons\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e308 — Camber shim assortment: +$195.00\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAdd-ons are included only when selected. Match each accessory to the vehicle and installed hardware.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"None","offer_id":56205697089858,"sku":"323","price":290.0,"currency_code":"USD","in_stock":true},{"title":"308","offer_id":56205697122626,"sku":"323 + 308","price":485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-323-45.jpg?v=1789759271"},{"product_id":"360-thrust-arm-bushing-puck-castor-adjustable-front-axle","title":"360 Thrust Arm Bushing\/Puck - Caster Adjustable - Front Axle","description":"\u003cp\u003eFour caster-adjustable front thrust-arm bushings for hydraulic-bushing applications. Designed to improve response and provide additional caster adjustment.\u003c\/p\u003e\u003cp\u003eRSS lists 987, 981\/GT4, 997, 991, 991 GT3 and 991 Turbo. Excludes 997 GT3\/GT2. Supply the vehicle year and model when confirming fitment.\u003c\/p\u003e\u003cp\u003eSupplier part number: 360. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS explicitly references these covered chassis: 987, 997, 981, 991. Exact axle, trim and installed-hardware restrictions in the description still apply.\u003c\/p\u003e\u003ch3\u003eOptional Add-ons\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e308 — Camber shim assortment: +$195.00\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAdd-ons are included only when selected. Match each accessory to the vehicle and installed hardware.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"None","offer_id":56205697220930,"sku":"360","price":290.0,"currency_code":"USD","in_stock":true},{"title":"308","offer_id":56205697253698,"sku":"360 + 308","price":485.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-360-51.webp?v=1789759859"},{"product_id":"372-rss-xl-front-lower-control-arms-987-997-991-c2-c4-turbo-981-982-718","title":"372 RSS XL Front Lower Control Arms (987, 997\/991 C2, C4, Turbo, 981\/982\/718)","description":"\u003cp\u003eRSS 372 XL front lower-control-arm pair for 987, 997\/991 Carrera C2\/C4 and Turbo, and 981\/982\/718. Includes 1\/2\/3\/7 mm shims and spherical monoball ends. Includes tall adjustable hydraulic-replacement thrust-arm bushings, RSS part 360, as confirmed by RSS.\u003c\/p\u003e\u003cp\u003eDesigned for lowered cars with reduced-travel dampers. Billet 6061 aluminum arms, anodized surfaces and zinc-plated steel parts combine strength with corrosion protection. Serviceable inner\/outer subassemblies use Teflon-lined steel spherical bearings. Monoball joints reduce rubber-bushing deflection; adjustable geometry supports camber and roll-center tuning. Made in the USA. Consult the chassis-fitment and installation guides; extra Litronic\/PASM\/torque-vector sensor brackets may be required. RSS cites the 2013 Grand-Am GX, 2014 Spanish Tarmac Rally and 2015 Pirelli World Challenge TC championship programs.\u003c\/p\u003e\u003cp\u003eNot compatible with base-model long-travel dampers, including base dampers fitted with lowering springs. RSS warns of possible binding at full suspension droop. PCCB-equipped 997\/991 Turbo cars may need front brake heat-shield clearance modifications.\u003c\/p\u003e\u003cp\u003eSupplier part number: 372. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS explicitly references these covered chassis: 987, 997, 991, 981, 718. Exact axle, trim and installed-hardware restrictions in the description still apply. Requires compatible reduced-travel suspension. Excludes base-model long-travel dampers, even with lowering springs.\u003c\/p\u003e\u003ch3\u003eOptional Add-ons\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e389 — XL sensor bracket set: +$60.00\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eOptional accessories are supplied only when selected.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"None","offer_id":56205711147330,"sku":"372","price":1825.0,"currency_code":"USD","in_stock":true},{"title":"389","offer_id":56205711180098,"sku":"372 + 389","price":1885.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-372-88.jpg?v=1789760239"},{"product_id":"361-rss-front-lower-control-arms-987-997-991-c2-c4-turbo-981-982-718","title":"361 RSS Front Lower Control Arms (987, 997\/991 C2, C4, Turbo, 981\/982\/718)","description":"\u003cp\u003eRSS 361 front lower-control-arm pair for 987, 997\/991 Carrera C2\/C4 and Turbo, and 981\/982\/718. Includes adjustable, non-hydraulic thrust-arm bushings, 1\/2\/3\/7 mm shims and spherical monoball ends.\u003c\/p\u003e\u003cp\u003eDesigned for lowered cars with reduced-travel dampers. Billet 6061 aluminum arms, anodized surfaces and zinc-plated steel parts combine strength with corrosion protection. Serviceable inner\/outer subassemblies use Teflon-lined steel spherical bearings. Monoball joints reduce rubber-bushing deflection; adjustable geometry supports camber and roll-center tuning. Made in the USA. Consult the chassis-fitment and installation guides; extra Litronic\/PASM\/torque-vector sensor brackets may be required. RSS cites the 2013 Grand-Am GX, 2014 Spanish Tarmac Rally and 2015 Pirelli World Challenge TC championship programs.\u003c\/p\u003e\u003cp\u003eNot compatible with base-model long-travel dampers, including base dampers fitted with lowering springs. RSS warns of possible binding at full suspension droop. PCCB-equipped 997\/991 Turbo cars may need front brake heat-shield clearance modifications.\u003c\/p\u003e\u003cp\u003eSupplier part number: 361. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS explicitly references these covered chassis: 987, 997, 991, 981, 718. Exact axle, trim and installed-hardware restrictions in the description still apply. Requires compatible reduced-travel suspension. Excludes base-model long-travel dampers, even with lowering springs.\u003c\/p\u003e\u003ch3\u003eOptional Add-ons\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e362 — One front sensor bracket: +$40.00\u003c\/li\u003e\n\u003cli\u003e362-2 — Two front sensor brackets: +$80.00\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOptional accessories are supplied only when selected.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"None","offer_id":56205711245634,"sku":"361","price":1825.0,"currency_code":"USD","in_stock":true},{"title":"362","offer_id":56205711278402,"sku":"361 + 362","price":1865.0,"currency_code":"USD","in_stock":true},{"title":"362-2","offer_id":56205711311170,"sku":"361 + 362-2","price":1905.0,"currency_code":"USD","in_stock":true},{"title":"362 + 362-2","offer_id":56205711343938,"sku":"361 + 362 + 362-2","price":1945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-361-97.webp?v=1789760293"},{"product_id":"362-front-lca-litronic-bracket-986-996-997-981-991","title":"362 Front LCA Litronic Bracket (986, 996, 997, 981, 991)","description":"\u003cp\u003eRSS 362 sensor bracket for compatible Tarmac or OE two-piece lower control arms. Supports Litronic\/adaptive-headlamp sensor integration.\u003c\/p\u003e\u003cp\u003eThe supplier chart specifies 362 for front 986\/987\/996\/997 (one bracket), front 981\/718\/991 (two brackets), and rear 996\/997 (one bracket). The product caption excludes 991 GT3\/RS front. Rear 986\/987 uses 364; rear 981\/718 uses 388 (which supersedes 387). Confirm the exact sensor and arm installation.\u003c\/p\u003e\u003cp\u003eSupplier part number: 362. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eAxle and quantity must follow the RSS sensor-bracket chart: front 986\/987\/996\/997; front 981\/718\/991; rear 996\/997. 991 GT3\/RS front excluded by the source caption.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205711376706,"sku":"362","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-362-102.webp?v=1789760320"},{"product_id":"3-307-xl-inner-spherical-bearing-mono-ball-end-kit-set-of-2","title":"3-307 XL Inner Spherical Bearing (Mono-ball) End Kit: Set of 2","description":"\u003cp\u003ePair of RSS XL inner monoball ends with housings extended by 15 mm. Provides additional negative-camber range while maintaining inner\/outer-arm stud engagement.\u003c\/p\u003e\u003cp\u003eListed for 991 GT3 OE front arms, 981 GT4 front\/rear arms, and 986\/987\/996\/997 equipped with compatible GT3\/RS split arms. Also fits compatible RSS Tarmac lower arms and Porsche OE split-arm inner-bushing locations. Replaces rubber-mounted inner bushes with spherical bearings. Optional 308 shim assortment and sensor brackets are available.\u003c\/p\u003e\u003cp\u003eSupplier part number: 3-307. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS explicitly references these covered chassis: 986, 987, 996, 997, 981, 991. Exact axle, trim and installed-hardware restrictions in the description still apply. 718\/982 assignment is conditional on the compatible RSS Tarmac lower-arm installation explicitly covered by the service-part description.\u003c\/p\u003e\u003ch3\u003eOptional Add-ons\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e308 — Camber shim assortment: +$195.00\u003c\/li\u003e\n\u003cli\u003e389 — XL front sensor bracket set: +$60.00\u003c\/li\u003e\n\u003cli\u003e388 — Sensor bracket set: +$70.00\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd-ons are included only when selected. Match each accessory to the vehicle and installed hardware.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"None","offer_id":56205735231810,"sku":"3-307","price":550.0,"currency_code":"USD","in_stock":true},{"title":"308","offer_id":56205735264578,"sku":"3-307 + 308","price":745.0,"currency_code":"USD","in_stock":true},{"title":"389","offer_id":56205735297346,"sku":"3-307 + 389","price":610.0,"currency_code":"USD","in_stock":true},{"title":"308 + 389","offer_id":56205735330114,"sku":"3-307 + 308 + 389","price":805.0,"currency_code":"USD","in_stock":true},{"title":"388","offer_id":56205735362882,"sku":"3-307 + 388","price":620.0,"currency_code":"USD","in_stock":true},{"title":"308 + 388","offer_id":56205735395650,"sku":"3-307 + 308 + 388","price":815.0,"currency_code":"USD","in_stock":true},{"title":"389 + 388","offer_id":56205735428418,"sku":"3-307 + 389 + 388","price":680.0,"currency_code":"USD","in_stock":true},{"title":"308 + 389 + 388","offer_id":56205735461186,"sku":"3-307 + 308 + 389 + 388","price":875.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-3-307-103.jpg?v=1789760328"},{"product_id":"3-256-inner-spherical-bearing-mono-ball-end-kit-set-of-2","title":"3-256 Inner Spherical Bearing (Mono-ball) End Kit: Set of 2","description":"\u003cp\u003ePair of RSS inner spherical-bearing\/monoball ends. Bolt-on replacement for compatible rubber-mounted inner bushings, with longer studs to increase negative-camber adjustment.\u003c\/p\u003e\u003cp\u003eListed for 991 GT3 OE front arms, 981 GT4 front\/rear arms, and 986\/987\/996\/997 equipped with compatible GT3\/RS split arms. Also fits compatible RSS Tarmac lower arms and Porsche OE split-arm inner-bushing locations. Optional 308 shims and sensor adapters are available.\u003c\/p\u003e\u003cp\u003eSupplier part number: 3-256. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS explicitly references these covered chassis: 986, 987, 996, 997, 981, 991. Exact axle, trim and installed-hardware restrictions in the description still apply. 718\/982 assignment is conditional on the compatible RSS Tarmac lower-arm installation explicitly covered by the service-part description.\u003c\/p\u003e\u003ch3\u003eOptional Add-ons\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e308 — Camber shim assortment: +$195.00\u003c\/li\u003e\n\u003cli\u003e362 — One front sensor bracket: +$40.00\u003c\/li\u003e\n\u003cli\u003e362-2 — Two front sensor brackets: +$80.00\u003c\/li\u003e\n\u003cli\u003e364 — Rear sensor bracket: +$45.00\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdd-ons are included only when selected. Match each accessory to the vehicle and installed hardware.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"None","offer_id":56205735493954,"sku":"3-256","price":550.0,"currency_code":"USD","in_stock":true},{"title":"308","offer_id":56205735526722,"sku":"3-256 + 308","price":745.0,"currency_code":"USD","in_stock":true},{"title":"362","offer_id":56205735559490,"sku":"3-256 + 362","price":590.0,"currency_code":"USD","in_stock":true},{"title":"308 + 362","offer_id":56205735592258,"sku":"3-256 + 308 + 362","price":785.0,"currency_code":"USD","in_stock":true},{"title":"362-2","offer_id":56205735625026,"sku":"3-256 + 362-2","price":630.0,"currency_code":"USD","in_stock":true},{"title":"308 + 362-2","offer_id":56205735657794,"sku":"3-256 + 308 + 362-2","price":825.0,"currency_code":"USD","in_stock":true},{"title":"362 + 362-2","offer_id":56205735690562,"sku":"3-256 + 362 + 362-2","price":670.0,"currency_code":"USD","in_stock":true},{"title":"308 + 362 + 362-2","offer_id":56205735723330,"sku":"3-256 + 308 + 362 + 362-2","price":865.0,"currency_code":"USD","in_stock":true},{"title":"364","offer_id":56205735756098,"sku":"3-256 + 364","price":595.0,"currency_code":"USD","in_stock":true},{"title":"308 + 364","offer_id":56205735788866,"sku":"3-256 + 308 + 364","price":790.0,"currency_code":"USD","in_stock":true},{"title":"362 + 364","offer_id":56205735821634,"sku":"3-256 + 362 + 364","price":635.0,"currency_code":"USD","in_stock":true},{"title":"308 + 362 + 364","offer_id":56205735854402,"sku":"3-256 + 308 + 362 + 364","price":830.0,"currency_code":"USD","in_stock":true},{"title":"362-2 + 364","offer_id":56205735887170,"sku":"3-256 + 362-2 + 364","price":675.0,"currency_code":"USD","in_stock":true},{"title":"308 + 362-2 + 364","offer_id":56205735919938,"sku":"3-256 + 308 + 362-2 + 364","price":870.0,"currency_code":"USD","in_stock":true},{"title":"362 + 362-2 + 364","offer_id":56205735952706,"sku":"3-256 + 362 + 362-2 + 364","price":715.0,"currency_code":"USD","in_stock":true},{"title":"308 + 362 + 362-2 + 364","offer_id":56205735985474,"sku":"3-256 + 308 + 362 + 362-2 + 364","price":910.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-3-256-112.jpg?v=1789760524"},{"product_id":"382-front-bump-toe-steer-link-arm-outer-ball-joint-pin-rebuild-kit","title":"382 Front Bump - Toe Steer Link\/Arm - Outer Ball Joint Pin Rebuild Kit","description":"\u003cp\u003eOuter ball-joint pin rebuild kit for RSS front toe\/bump-steer kits 370 and 371. Contains one tapered stud, upper and lower lock nuts, and two stud spacers\/washers.\u003c\/p\u003e\u003cp\u003eRSS requires a new 382 kit whenever the ball-joint pin has been removed from the hub.\u003c\/p\u003e\u003cp\u003eSupplier part number: 382. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor the specified RSS suspension hardware on 986, 987, 996 and 997. RSS lists these chassis for compatible 370 front toe\/bump-steer or 312 rear toe-link kits; this service item fits those RSS assemblies, not every factory suspension.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 991. Service-part fitment is to the compatible RSS assembly and sensor equipment, not every factory part on these chassis.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205736018242,"sku":"382","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-382-121.webp?v=1789760733"},{"product_id":"380-rss-lower-control-arm-ball-joint-pin-rebuild-kit","title":"380 RSS - Lower Control Arm Ball Joint Pin Rebuild Kit","description":"\u003cp\u003eOuter ball-joint pin rebuild kit for RSS lower control arms 356, 357, 361, 372, 373, 374 and 366. One kit per arm: tapered stud, upper\/lower lock nuts, and four roll-center spacers\/washers.\u003c\/p\u003e\u003cp\u003eRSS requires replacement with a new 380 kit after the pin is removed from the hub. Consult the lower-control-arm instructions.\u003c\/p\u003e\u003cp\u003eSupplier part number: 380. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor RSS lower control arms 356\/357\/361\/372\/373\/374\/366 only. Chassis assignment follows the documented fitment of those RSS assemblies; axle and trim restrictions remain those of the installed arm.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205736378690,"sku":"380","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-380-126.webp?v=1789760763"},{"product_id":"30178-dust-boot-for-rod-end-bearings","title":"30178 Dust Boot for Rod End Bearings","description":"\u003cp\u003eSingle RSS rod-end bearing dust boot for compatible toe-steer, bump-steer, rear upper-link and drop-link kits. Shields the bearing from weather and contamination to help prolong service life.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30178. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor the specified RSS suspension hardware on 986, 987, 996 and 997. RSS lists these chassis for compatible 370 front toe\/bump-steer or 312 rear toe-link kits; this service item fits those RSS assemblies, not every factory suspension.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 718, 981, 991. Service-part fitment is to the compatible RSS assembly and sensor equipment, not every factory part on these chassis.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56205737558338,"sku":"30178","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-30178-135.webp?v=1789760826"},{"product_id":"30074-rss-camber-alignment-shim-11mm","title":"30074 RSS Camber \/ Alignment Shim (11MM)","description":"\u003cp\u003eA 11mm RSS camber\/alignment shim, supplied individually. Made by RSS in the USA for compatible motorsport-style two-piece lower control arms on late-model Porsche applications.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30074. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part in its 987, 986, 991, 996, 997, 981, 718 chassis catalogs. Requires compatible motorsport-style two-piece lower control arms; this is not a blanket fit for factory one-piece arms. Confirm shim size and the required alignment setup.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206057242946,"sku":"30074","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-30020-12.webp?v=1789768242"},{"product_id":"30020-rss-camber-alignment-shim-5mm","title":"30020 RSS Camber\/Alignment Shim (5mm)","description":"\u003cp\u003eA 5mm RSS camber\/alignment shim, supplied individually. Made by RSS in the USA for compatible motorsport-style two-piece lower control arms on late-model Porsche applications.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30020. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part in its 987, 986, 991, 996, 997, 981, 718 chassis catalogs. Requires compatible motorsport-style two-piece lower control arms; this is not a blanket fit for factory one-piece arms. Confirm shim size and the required alignment setup.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206060323138,"sku":"30020","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-30020-12.webp?v=1789768242"},{"product_id":"30018-rss-camber-alignment-shim-10mm","title":"30018 RSS Camber\/Alignment Shim (10mm)","description":"\u003cp\u003eA 10mm RSS camber\/alignment shim, supplied individually. Made by RSS in the USA for compatible motorsport-style two-piece lower control arms on late-model Porsche applications.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30018. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part in its 987, 986, 991, 996, 997, 981, 718 chassis catalogs. Requires compatible motorsport-style two-piece lower control arms; this is not a blanket fit for factory one-piece arms. Confirm shim size and the required alignment setup.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206060519746,"sku":"30018","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-308-13.jpg?v=1789768248"},{"product_id":"30017-rss-camber-alignment-shim-7mm","title":"30017 RSS Camber\/Alignment Shim (7mm)","description":"\u003cp\u003eA 7mm RSS camber\/alignment shim, supplied individually. Made by RSS in the USA for compatible motorsport-style two-piece lower control arms on late-model Porsche applications.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30017. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part in its 987, 986, 991, 996, 997, 981, 718 chassis catalogs. Requires compatible motorsport-style two-piece lower control arms; this is not a blanket fit for factory one-piece arms. Confirm shim size and the required alignment setup.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206060618050,"sku":"30017","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-308-13.jpg?v=1789768248"},{"product_id":"30016-rss-camber-alignment-shim-3mm","title":"30016 RSS Camber\/Alignment Shim (3mm)","description":"\u003cp\u003eA 3mm RSS camber\/alignment shim, supplied individually. Made by RSS in the USA for compatible motorsport-style two-piece lower control arms on late-model Porsche applications.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30016. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part in its 987, 986, 991, 996, 997, 981, 718 chassis catalogs. Requires compatible motorsport-style two-piece lower control arms; this is not a blanket fit for factory one-piece arms. Confirm shim size and the required alignment setup.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206061240642,"sku":"30016","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-308-13.jpg?v=1789768248"},{"product_id":"30015-rss-camber-alignment-shim-2mm","title":"30015 RSS Camber\/Alignment Shim (2mm)","description":"\u003cp\u003eRSS camber\/alignment shim, 2 mm thick. Sold individually: $19.00 for one shim. Supplier part number: 30015. Supplied by RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part in its 987, 986, 991, 996, 997, 981, 718 chassis catalogs. Requires compatible motorsport-style two-piece lower control arms; this is not a blanket fit for factory one-piece arms. Confirm shim size and the required alignment setup.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206061732162,"sku":"30015","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-308-13.jpg?v=1789768248"},{"product_id":"30014-rss-camber-alignment-shim-1mm","title":"30014 RSS Camber\/Alignment Shim (1mm)","description":"\u003cp\u003eA 1mm RSS camber\/alignment shim, supplied individually. Made by RSS in the USA for compatible motorsport-style two-piece lower control arms on late-model Porsche applications.\u003c\/p\u003e\u003cp\u003eSupplier part number: 30014. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part in its 987, 986, 991, 996, 997, 981, 718 chassis catalogs. Requires compatible motorsport-style two-piece lower control arms; this is not a blanket fit for factory one-piece arms. Confirm shim size and the required alignment setup.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206062059842,"sku":"30014","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-308-13.jpg?v=1789768248"},{"product_id":"308-camber-alignment-shim-assortment-pack","title":"308 Camber\/Alignment Shim \"Assortment Pack\"","description":"\u003cp\u003eA USA-made assortment of alignment shims for RSS or original Porsche two-piece lower control arms.\u003c\/p\u003e\u003cp\u003eRSS describes two shims per included size, covering 1, 2, 3, either 5 or 7, and 10 mm. The actual mix can change with available stock.\u003c\/p\u003e\u003cp\u003eSupplier part number: 308. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part in its 987, 986, 991, 996, 997, 981, 718 chassis catalogs. Requires compatible motorsport-style two-piece lower control arms; this is not a blanket fit for factory one-piece arms. Confirm shim size and the required alignment setup.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206062387522,"sku":"308","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-308-13.jpg?v=1789768248"},{"product_id":"30195-rear-camber-alignment-shim-13mm-991-gt3-gt2-rs","title":"30195 Rear Camber\/Alignment Shim (13mm ) - 991 GT3\/GT2\/RS","description":"\u003cp\u003eSupplier part number: 30195. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003e30195 Rear Camber\/Alignment Shim (13mm)\u003c\/p\u003e\u003cp\u003eTarmac Series Alignment\/Camber Shim (13mm x 1). Rear Axle 991 GT3\/GT2\/RS - for Porsche OE 2-Piece Rear Lower Control Arm Set.\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e30195 Rear Camber\/Alignment Shim (13mm ) - 991 GT3\/GT2\/RS. Check the exact axle, trim and equipment requirements in the supplier description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211832275266,"sku":"30195","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-44.png?v=1789871718"},{"product_id":"30192-rear-camber-alignment-shim-3mm-991-gt3-gt2-rs","title":"30192 Rear Camber\/Alignment Shim (3mm) - 991 GT3\/GT2\/RS","description":"\u003cp\u003eSupplier part number: 30192. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003e30192 Rear Camber\/Alignment Shim (3mm)\u003c\/p\u003e\u003cp\u003eTarmac Series Alignment\/Camber Shim (3mm x 1). Rear Axle 991 GT3\/GT2\/RS - for Porsche OE 2-Piece Rear Lower Control Arm Set.\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e30192 Rear Camber\/Alignment Shim (3mm) - 991 GT3\/GT2\/RS. Check the exact axle, trim and equipment requirements in the supplier description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211832308034,"sku":"30192","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-44.png?v=1789871718"},{"product_id":"30191-rear-camber-alignment-shim-2mm-991-gt3-gt2-rs","title":"30191 Rear Camber\/Alignment Shim (2mm) - 991 GT3\/GT2\/RS","description":"\u003cp\u003eSupplier part number: 30191. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003e30191 Rear Camber\/Alignment Shim (2mm)\u003c\/p\u003e\u003cp\u003eTarmac Series Alignment\/Camber Shim (2mm x 1). Rear Axle 991 GT3\/GT2\/RS - for Porsche OE 2-Piece Rear Lower Control Arm Set.\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e30191 Rear Camber\/Alignment Shim (2mm) - 991 GT3\/GT2\/RS. Check the exact axle, trim and equipment requirements in the supplier description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211832340802,"sku":"30191","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-45.png?v=1789871724"},{"product_id":"30190-rear-camber-alignment-shim-1mm-991-gt3-gt2-rs","title":"30190 Rear Camber\/Alignment Shim  (1mm) - 991 GT3\/GT2\/RS","description":"\u003cp\u003eSupplier part number: 30190. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003e30190 Rear Camber\/Alignment Shim (1mm)\u003c\/p\u003e\u003cp\u003eTarmac Series Alignment\/Camber Shim (1mm x 1). Rear Axle 991 GT3\/GT2\/RS - for Porsche OE 2-Piece Rear Lower Control Arm Set.\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e30190 Rear Camber\/Alignment Shim  (1mm) - 991 GT3\/GT2\/RS. Check the exact axle, trim and equipment requirements in the supplier description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211832373570,"sku":"30190","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-44.png?v=1789871718"},{"product_id":"397-rear-camber-alignment-shim-assortment-pack-991-gt3-gt2-rs","title":"397 Rear Camber\/Alignment Shim \"Assortment Pack\" -  991 GT3\/GT2\/RS","description":"\u003cp\u003eSupplier part number: 397. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eRSS #397 Tarmac Series Rear Alignment\/Camber Shim Assortment Pack: For Rear Axle 991 GT3\/GT2\/RS: (2 of each size) 1mm, 2mm, 3mm, 8mm 10mm, for Porsche OE 2-Piece Rear Lower Control Arm Set.\u003c\/p\u003e\u003cp\u003eMade in the USA\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003e397 Rear Camber\/Alignment Shim \"Assortment Pack\" -  991 GT3\/GT2\/RS. Check the exact axle, trim and equipment requirements in the supplier description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211832439106,"sku":"397","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-45.png?v=1789871724"},{"product_id":"ts-2f-991-gt3-rs-gt4-718-gt4-rs-spyder-front-axle-camber-suspension-kit","title":"TS-2F-991 GT3-RS\/GT4\/718-GT4-RS\/ Spyder - Front Axle Camber\/Suspension Kit","description":"\u003cp\u003eSupplier part number: TS-2F-991 GT3-RS\/GT4. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eTS-2F-991 GT3-RS\/GT4\/718-GT4\/ Spyder - Front Axle Camber \/ Mono Ball Suspension Kit.\u003c\/p\u003e\u003cp\u003eStandard Kit: 2-356 Inner Monoball adjustment range of OEM to aprox. -2.8 Degrees Camber. XL Kit : 3-307 Inner Monoball adjustment range of -2.5 to aprox -3.5 degrees camber or higher , requires additional Sensor bracket #389.\u003c\/p\u003e\u003cp\u003eRSS confirms the Standard (part 2-356) and XL (part 3-307) configurations have the same base kit price. Select Standard or XL using the Kit Version option. Optional sensor brackets and dust boots are priced separately.\u003c\/p\u003e\u003cp\u003eOptional accessories: 30178-2 dust boots (+$22.00); 362 brackets x2 (+$80.00); 389 sensor brackets (+$60.00). Select the required configuration.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFront axle: Porsche 991 GT3\/RS and 981\/718 GT4\/Spyder family. Standard uses inner monoball part 2-356; XL uses part 3-307 and requires sensor bracket set 389 where applicable.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"No extras \/ Standard — 2-356","offer_id":56211832471874,"sku":"TS-2F-991 GT3-RS\/GT4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"389 sensor brackets \/ Standard — 2-356","offer_id":56211832504642,"sku":"TS-2F-991 GT3-RS\/GT4+389","price":1720.0,"currency_code":"USD","in_stock":true},{"title":"362 brackets x2 \/ Standard — 2-356","offer_id":56211832537410,"sku":"TS-2F-991 GT3-RS\/GT4+362x2","price":1740.0,"currency_code":"USD","in_stock":true},{"title":"362 brackets x2 + 389 sensor brackets \/ Standard — 2-356","offer_id":56211832570178,"sku":"TS-2F-991 GT3-RS\/GT4+362x2+389","price":1800.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots \/ Standard — 2-356","offer_id":56211832602946,"sku":"TS-2F-991 GT3-RS\/GT4+30178-2","price":1682.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots + 389 sensor brackets \/ Standard — 2-356","offer_id":56211832635714,"sku":"TS-2F-991 GT3-RS\/GT4+30178-2+389","price":1742.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots + 362 brackets x2 \/ Standard — 2-356","offer_id":56211832668482,"sku":"TS-2F-991 GT3-RS\/GT4+30178-2+362x2","price":1762.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots + 362 brackets x2 + 389 sensor brackets \/ Standard — 2-356","offer_id":56211832701250,"sku":"TS-2F-991 GT3-RS\/GT4+30178-2+362x2+389","price":1822.0,"currency_code":"USD","in_stock":true},{"title":"No extras \/ XL — 3-307","offer_id":67680542261570,"sku":"TS-2F-991 GT3-RS\/GT4","price":1660.0,"currency_code":"USD","in_stock":true},{"title":"389 sensor brackets \/ XL — 3-307","offer_id":67680542294338,"sku":"TS-2F-991 GT3-RS\/GT4+389","price":1720.0,"currency_code":"USD","in_stock":true},{"title":"362 brackets x2 \/ XL — 3-307","offer_id":67680542327106,"sku":"TS-2F-991 GT3-RS\/GT4+362x2","price":1740.0,"currency_code":"USD","in_stock":true},{"title":"362 brackets x2 + 389 sensor brackets \/ XL — 3-307","offer_id":67680542359874,"sku":"TS-2F-991 GT3-RS\/GT4+362x2+389","price":1800.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots \/ XL — 3-307","offer_id":67680542392642,"sku":"TS-2F-991 GT3-RS\/GT4+30178-2","price":1682.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots + 389 sensor brackets \/ XL — 3-307","offer_id":67680542425410,"sku":"TS-2F-991 GT3-RS\/GT4+30178-2+389","price":1742.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots + 362 brackets x2 \/ XL — 3-307","offer_id":67680542458178,"sku":"TS-2F-991 GT3-RS\/GT4+30178-2+362x2","price":1762.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots + 362 brackets x2 + 389 sensor brackets \/ XL — 3-307","offer_id":67680542490946,"sku":"TS-2F-991 GT3-RS\/GT4+30178-2+362x2+389","price":1822.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-46.webp?v=1789871736"},{"product_id":"389-xl-torque-vector-litronic-sensor-bracket-set","title":"389 XL Torque Vector\/Litronic Sensor Bracket Set","description":"\u003cp\u003eSupplier part number: 389. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eRSS Part # 389 integrates the Litronic\/PASM\/Torque Vector Sensor with the XL RSS Tarmac Series Lower Control Arms.\u003c\/p\u003e\u003cp\u003eNOTE: Most models may require additional Litronic\/PASM\/Torque Vector Sensor Brackets. See Guide Below or scoll through product photo gallery.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eFor the front XL RSS inner monoball 3-307 and compatible 981\/718\/991 Litronic\/PASM\/torque-vector sensors. Match the supplier bracket guide.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211836535106,"sku":"389","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-72.png?v=1789871989"},{"product_id":"371-front-toe-steer-bump-steer-kit-xl-981-982-gt4-991-all","title":"371 Front Toe Steer \/ Bump Steer Kit XL (981, 982, GT4, 991 all)","description":"\u003cp\u003eSupplier part number: 371. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eThe RSS Adjustable Front Toe\/Bump Steer XL Kit is designed for Porsche models that have been lowered. This kit will help minimize the suspension geometry change in the front of the vehicle. Allows for bump steer adjustment. Improves handling, feedback and control. AVAILABLE FOR ALL PORSCHE® 981, 982, GT4, 991 INCLUDING TURBO \u0026amp; GT3\/GT3RS.\u003c\/p\u003e\u003cp\u003eOptional accessories: 30178-2 dust boots (+$22.00). Select the required configuration.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 981, 982\/718, GT4 and 991; lowered vehicles. Front toe\/bump-steer kit.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Standard \/ no extras","offer_id":56211836698946,"sku":"371","price":625.0,"currency_code":"USD","in_stock":true},{"title":"30178-2 dust boots","offer_id":56211836731714,"sku":"371+30178-2","price":647.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-370-139.webp?v=1789760851"},{"product_id":"388-torque-vector-litronic-sensor-bracket-set","title":"388 Torque Vector\/Litronic Sensor Bracket Set","description":"\u003cp\u003eSupplier part number: 388. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eRSS Part # 388 integrates the Litronic\/PASM\/Torque Vector Sensor with the RSS Tarmac Series Lower Control Arms.\u003c\/p\u003e\u003cp\u003eNOTE: Most models may require additional Litronic\/PASM\/Torque Vector Sensor Brackets. See Guide Below or scoll through product photo gallery.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRear XL RSS inner monoball 3-307 sensor adaptation on compatible 981\/718\/991 applications; follow supplier bracket chart.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211854688578,"sku":"388","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-197.png?v=1789874133"},{"product_id":"30058-inner-bushing-rss-lower-control-arm","title":"30058 Inner Bushing - RSS Lower Control Arm","description":"\u003cp\u003eSupplier part number: 30058. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003e30058 Inner Lower Control Arm Bushing x 1. Two are required for a single Lower Control Arm. Typically replaced when servicing inner monoball bearing #30085.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eService replacement inner bushing for compatible RSS lower-control-arm assemblies; match the installed RSS arm part number.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211859767618,"sku":"30058","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-remaining-extra-28.png?v=1789875123"}],"url":"https:\/\/levinsonperformance.com\/collections\/levinson-991-911-2012-2019-control-arms-links.oembed?page=2","provider":"Levinson Performance \u0026 Mfg.","version":"1.0","type":"link"}