{"title":"RSS — 992 911 (2019+)","description":"\u003cp\u003eRoad Sport Supply products for Porsche 992 911 (2019+). Check each product for exact model, trim, axle and equipment requirements.\u003c\/p\u003e\u003ch2\u003eShop by Category\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/rss-992-911-2019-brake-rotors-steel\"\u003eBrake Rotors \/ Steel\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/rss-992-911-2019-exhaust\"\u003eExhaust\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/rss-992-911-2019-harness-bars-roll-bars\"\u003eHarness Bars \/ Roll Bars\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/rss-992-911-2019-suspension-coilovers-and-components\"\u003eSuspension Coilovers and Components\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/rss-992-911-2019-wheels\"\u003eWheels\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/rss-992-911-2019-wheel-spacer-kits-wheel-lug-bolts\"\u003eWheel Spacer Kits \/ Wheel Lug Bolts\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"\/collections\/rss-road-sport-supply\"\u003eBrowse all RSS applications\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"384-15mm-hubcentric-split-finish-silver-spacer-black-wheel-bolts","title":"384 (15mm) Hubcentric \"Split Finish\" Silver Spacer\/Black Wheel Bolts","description":"\u003cp\u003eA pair of 15mm RSS hubcentric wheel spacers, supplied with silver spacers and black bolts. The bolt-equipped kit includes the appropriate longer bolts and a wheel-locating pin.\u003c\/p\u003e\u003cp\u003eManufactured by RSS in the USA using premium materials. The spacer range includes 5, 7, 15 and 18 mm options, with hubcentric features where applicable and matching or contrasting finishes. RSS advertises a fitment and satisfaction guarantee.\u003c\/p\u003e\u003cp\u003eSelect thickness and hardware for the actual wheel and vehicle combination. The gallery includes the supplier's installation information and range illustrations; not every pictured component is included in this part number.\u003c\/p\u003e\u003cp\u003eSupplier part number: 384. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part for 987, 986, 991, 996, 997, 981, 718 applications. Confirm wheel offset, available clearance, hub engagement and bolt length for the specific installation.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 992. Match the exact model, axle, wheel\/hub and installed-equipment requirements in the product description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206062518594,"sku":"384","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-383-14.webp?v=1789768254"},{"product_id":"383-7mm-hubcentric-split-finish-silver-spacer-black-wheel-bolts","title":"383 (7mm) Hubcentric \"Split Finish\" Silver Spacer\/Black Wheel Bolts","description":"\u003cp\u003eA pair of 7mm RSS hubcentric wheel spacers, supplied with silver spacers and black bolts. The bolt-equipped kit includes the appropriate longer bolts and a wheel-locating pin.\u003c\/p\u003e\u003cp\u003eManufactured by RSS in the USA using premium materials. The spacer range includes 5, 7, 15 and 18 mm options, with hubcentric features where applicable and matching or contrasting finishes. RSS advertises a fitment and satisfaction guarantee.\u003c\/p\u003e\u003cp\u003eSelect thickness and hardware for the actual wheel and vehicle combination. The gallery includes the supplier's installation information and range illustrations; not every pictured component is included in this part number.\u003c\/p\u003e\u003cp\u003eSupplier part number: 383. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part for 987, 986, 991, 996, 997, 981, 718 applications. Confirm wheel offset, available clearance, hub engagement and bolt length for the specific installation.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 992. Match the exact model, axle, wheel\/hub and installed-equipment requirements in the product description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206062747970,"sku":"383","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-383-14.webp?v=1789768254"},{"product_id":"343-11-7mm-hubcentric-black-spacer-black-wheel-bolts","title":"343\/11 (7mm) Hubcentric Black Spacer\/Black Wheel Bolts","description":"\u003cp\u003eA pair of 7mm RSS hubcentric wheel spacers, supplied with black spacers and black bolts. The bolt-equipped kit includes the appropriate longer bolts and a wheel-locating pin.\u003c\/p\u003e\u003cp\u003eManufactured by RSS in the USA using premium materials. The spacer range includes 5, 7, 15 and 18 mm options, with hubcentric features where applicable and matching or contrasting finishes. RSS advertises a fitment and satisfaction guarantee.\u003c\/p\u003e\u003cp\u003eSelect thickness and hardware for the actual wheel and vehicle combination. The gallery includes the supplier's installation information and range illustrations; not every pictured component is included in this part number.\u003c\/p\u003e\u003cp\u003eSupplier part number: 343\/11. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part for 987, 986, 991, 996, 997, 981, 718 applications. Confirm wheel offset, available clearance, hub engagement and bolt length for the specific installation.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 992. Match the exact model, axle, wheel\/hub and installed-equipment requirements in the product description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206066057538,"sku":"343\/11","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-340-11-29.webp?v=1789768551"},{"product_id":"343-10-7mm-hubcentric-silver-spacer-silver-wheel-bolts","title":"343\/10 (7mm) Hubcentric Silver Spacer\/Silver Wheel Bolts","description":"\u003cp\u003eA pair of 7mm RSS hubcentric wheel spacers, supplied with silver spacers and silver bolts. The bolt-equipped kit includes the appropriate longer bolts and a wheel-locating pin.\u003c\/p\u003e\u003cp\u003eManufactured by RSS in the USA using premium materials. The spacer range includes 5, 7, 15 and 18 mm options, with hubcentric features where applicable and matching or contrasting finishes. RSS advertises a fitment and satisfaction guarantee.\u003c\/p\u003e\u003cp\u003eSelect thickness and hardware for the actual wheel and vehicle combination. The gallery includes the supplier's installation information and range illustrations; not every pictured component is included in this part number.\u003c\/p\u003e\u003cp\u003eSupplier part number: 343\/10. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part for 987, 986, 991, 996, 997, 981, 718 applications. Confirm wheel offset, available clearance, hub engagement and bolt length for the specific installation.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 992. Match the exact model, axle, wheel\/hub and installed-equipment requirements in the product description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206066123074,"sku":"343\/10","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-340-10-31.webp?v=1789768561"},{"product_id":"341-10-18mm-hubcentric-silver-spacer-silver-wheel-bolts","title":"341\/10 (18mm) Hubcentric Silver Spacer\/Silver Wheel Bolts","description":"\u003cp\u003eA pair of 18mm RSS hubcentric wheel spacers, supplied with silver spacers and silver bolts. The bolt-equipped kit includes the appropriate longer bolts and a wheel-locating pin.\u003c\/p\u003e\u003cp\u003eManufactured by RSS in the USA using premium materials. The spacer range includes 5, 7, 15 and 18 mm options, with hubcentric features where applicable and matching or contrasting finishes. RSS advertises a fitment and satisfaction guarantee.\u003c\/p\u003e\u003cp\u003eSelect thickness and hardware for the actual wheel and vehicle combination. The gallery includes the supplier's installation information and range illustrations; not every pictured component is included in this part number.\u003c\/p\u003e\u003cp\u003eSupplier part number: 341\/10. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part for 987, 986, 991, 996, 997, 981, 718 applications. Confirm wheel offset, available clearance, hub engagement and bolt length for the specific installation.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 992. Match the exact model, axle, wheel\/hub and installed-equipment requirements in the product description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206077690178,"sku":"341\/10","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-341-10-35.jpg?v=1789768704"},{"product_id":"340-11-15mm-hubcentric-black-spacer-black-wheel-bolts","title":"340\/11 (15mm) Hubcentric Black Spacer\/Black Wheel Bolts","description":"\u003cp\u003eA pair of 15mm RSS hubcentric wheel spacers, supplied with black spacers and black bolts. The bolt-equipped kit includes the appropriate longer bolts and a wheel-locating pin.\u003c\/p\u003e\u003cp\u003eManufactured by RSS in the USA using premium materials. The spacer range includes 5, 7, 15 and 18 mm options, with hubcentric features where applicable and matching or contrasting finishes. RSS advertises a fitment and satisfaction guarantee.\u003c\/p\u003e\u003cp\u003eSelect thickness and hardware for the actual wheel and vehicle combination. The gallery includes the supplier's installation information and range illustrations; not every pictured component is included in this part number.\u003c\/p\u003e\u003cp\u003eSupplier part number: 340\/11. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part for 987, 986, 991, 996, 997, 981, 718 applications. Confirm wheel offset, available clearance, hub engagement and bolt length for the specific installation.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 992. Match the exact model, axle, wheel\/hub and installed-equipment requirements in the product description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206077952322,"sku":"340\/11","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-340-11-29.webp?v=1789768551"},{"product_id":"340-10-15mm-hubcentric-silver-spacer-silver-wheel-bolts","title":"340\/10 (15mm) Hubcentric Silver Spacer\/Silver Wheel Bolts","description":"\u003cp\u003eA pair of 15mm RSS hubcentric wheel spacers, supplied with silver spacers and silver bolts. The bolt-equipped kit includes the appropriate longer bolts and a wheel-locating pin.\u003c\/p\u003e\u003cp\u003eManufactured by RSS in the USA using premium materials. The spacer range includes 5, 7, 15 and 18 mm options, with hubcentric features where applicable and matching or contrasting finishes. RSS advertises a fitment and satisfaction guarantee.\u003c\/p\u003e\u003cp\u003eSelect thickness and hardware for the actual wheel and vehicle combination. The gallery includes the supplier's installation information and range illustrations; not every pictured component is included in this part number.\u003c\/p\u003e\u003cp\u003eSupplier part number: 340\/10. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eRSS lists this part for 987, 986, 991, 996, 997, 981, 718 applications. Confirm wheel offset, available clearance, hub engagement and bolt length for the specific installation.\u003c\/p\u003e\u003cp\u003eRSS also lists this item for 992. Match the exact model, axle, wheel\/hub and installed-equipment requirements in the product description.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56206078411074,"sku":"340\/10","price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-340-10-31.webp?v=1789768561"},{"product_id":"girodisc-porsche-992-gt3-front-rotors-a1-272","title":"GiroDisc - Porsche 992 GT3 Front Rotors - (A1-272)","description":"\u003cp\u003eSupplier part number: A1-272. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eGiroDisc - Porsche 992 GT3 Front Rotors - (A1-272)\u003c\/p\u003e\u003cp\u003eThe Girodisc system is a direct replacement for the OE disc on the 992 GT3 with OEM iron rotors. No modifications are necessary, and it allows the use of unmodified factory pads. The disc will bolt directly to the car and work with factory calipers.\u003c\/p\u003e\u003cp\u003eThe central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in-house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.\u003c\/p\u003e\u003cp\u003eThe rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.\u003c\/p\u003e\u003cp\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.\u003c\/p\u003e\u003cp\u003eSold\/priced per pair.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 992 GT3 with factory iron brakes; front rotor pair, factory calipers and pads.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211820052802,"sku":"A1-272","price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-1.jpg?v=1789871381"},{"product_id":"girodisc-992-gt3-gt4-rs-rear-rotors-a2-272","title":"GiroDisc - 992 GT3, GT4 RS Rear Rotors - (A2-272)","description":"\u003cp\u003eSupplier part number: A2-272. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eGiroDisc - 992 GT3, GT4 RS Rear Rotors - (A2-272)\u003c\/p\u003e\u003cp\u003eThe Girodisc system is a direct replacement for the OE disc on the 992 GT3\/GT4 RS with OEM iron rotors. No modifications are necessary, and it allows the use of unmodified factory pads. The disc will bolt directly to the car and work with factory calipers.\u003c\/p\u003e\u003cp\u003eThe central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in-house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.\u003c\/p\u003e\u003cp\u003eThe rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.\u003c\/p\u003e\u003cp\u003eOnce the Girodisc system is in place, simply replace the cast iron rotor when needed.\u003c\/p\u003e\u003cp\u003eSold\/priced per pair.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 992 GT3 and 718 Cayman GT4 RS with factory iron brakes; rear rotor pair.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211820577090,"sku":"A2-272","price":1650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-1.jpg?v=1789871381"},{"product_id":"shark-werks-exhaust-system-992-gt3","title":"Shark Werks Exhaust System - 992 GT3","description":"\u003cp\u003eSupplier part number: X992. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eShark Werks Exhaust System for 992 GT3\u003c\/p\u003e\u003cp\u003eDeveloped by lifetime car and motorsport enthusiasts with a passion to build the best sounding exhaust possible.\u003c\/p\u003e\u003cp\u003eWhen Porsche's 992 GT3 models hit the market, the verdict was that this car simply dominated the previous generations with performance, aerodynamic functionality, and new technology.\u003c\/p\u003e\u003cp\u003eHowever, many people familiar with GT cars, especially those modified with parts like our popular Sports Exhaust on 991 and 997 GT3 models , found that the exhaust was a bit muted.\u003c\/p\u003e\u003cp\u003eThe wailing howls of the previous generations seemed subdued, and in their place was a muddy sound and an electronic valve system that seemed to have a mind of its own. While the car would open the valves to start with a loud bark, it would then quickly quiet down, and even on the louder modes, the exhaust would sometimes close the valves and refuse to make the noise that was characterstic of the race bred GT3.\u003c\/p\u003e\u003cp\u003eWith this in mind, we focused our efforts on developing prototypes in order to extract some of the lost noises we were so fond of in the previous generations.\u003c\/p\u003e\u003cp\u003eThis design came about from numerous tests and challenges. We developed precision CNC-machined rings that perfectly fit the enormous 8\" catalytic converter (or OPF in International markets) outlets, then meticulously welded these to high flow cones within the size constraints of the original exhaust. We chose dual mandrel bent 3\" tubing with a large crossover tube, and additional extension tubes were added to tune the sound to what we believed was the best tone possible with no unpleasant drone or resonance on the inside. Our goal was for it to be fun on the outside, and yet classy on the inside; without giving you a headache. We made sure the exhaust still exits in the original location of the bumper, through integrated slashcut dual 100mm tips like our 991 GT3 upgrades.\u003c\/p\u003e\u003cp\u003eThe result from these changes is an aggressive startup bark, and an exciting tone under acceleration, but on a car that can still be driven on long trips while conversing with a passenger or talking on the phone when needed.\u003c\/p\u003e\u003cp\u003eAt idle, gentle throttle, or between 50 and 80 MPH in top-gear, the car is surprisingly docile, but downshifting and getting into the power still rewards you with a song worthy of the GT3 name.\u003c\/p\u003e\u003cp\u003eThe electronic valves are removed using Soul Performance Valve Delete Modules to prevent check engine lights or error codes, which we believed are the best available on the market.\u003c\/p\u003e\u003cp\u003eThe default finish is a flawless stainless steel, but you can request to have the exhaust tips and center component ceramic coated if you prefer a satin black finish (please note: this adds approximately 2-weeks to the build time).\u003c\/p\u003e\u003cp\u003eFeatures\u003c\/p\u003e\u003cp\u003e- Louder, exotic and aggressive tone without uncomfortable drone or resonance at highway speeds\u003c\/p\u003e\u003cp\u003e- 100% Made in the USA, stainless steel construction\u003c\/p\u003e\u003cp\u003e- Removes about 20 pounds from the rear of the car\u003c\/p\u003e\u003cp\u003e- Optimized for maximum power output and weight savings while retaining reliability, without modifying ECU programming\u003c\/p\u003e\u003cp\u003e- Does not affect emissions systems, catalytic converters, or cause Check Engine lights (50-state Emissions Legal)\u003c\/p\u003e\u003cp\u003e- 100% reversible, OEM-like fitment, with no cutting or welding required\u003c\/p\u003e\u003cp\u003e** NOTE: The original Porsche exhaust clamps that attach the muffler to the car to the catalytic converter can be added for an additional charge, or you can remove them from your original muffler by removing a small metal tab. It can still be re-used on the original or Shark Werks Exhaust later.\u003c\/p\u003e\u003cp\u003e** NOTE 2: At this time this exhaust is only available for USA models without particulate filter equipped\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 992 GT3; supplier specifies USA models without a particulate filter. Reuses factory catalytic converters.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211820609858,"sku":"X992","price":4240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-2.jpg?v=1789871388"},{"product_id":"ohlins-road-track-dfv-suspension-kit-992-carrera-turbo-s-gts-t","title":"Ohlins Road \u0026 Track DFV Suspension Kit - 992 Carrera, Turbo, S, GTS, T","description":"\u003cp\u003eSupplier part number: POS MU10S1. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eExperience the pinnacle of performance without compromising comfort in your daily driving. The Öhlins Road \u0026amp; Track range offers exceptional traction and control on track days while retaining a refined ride quality for road use. Our Road \u0026amp; Track products are a versatile option for drivers who want it all, equally as popular among manufacturers making the ultimate track day car as they are with aftermarket customers aiming to further upgrade chassis performance. Choose between full suspension kits or individual shock absorbers and struts, depending on the application.\u003c\/p\u003e\u003cp\u003eThe Öhlins Road \u0026amp; Track shock absorber kits bring the excitement of racing to your own car, without sacrificing comfort and safety when commuting to work.\u003c\/p\u003e\u003cp\u003eOur unique Dual Flow Valve (DFV) technology allows you to quickly adjust the damper stiffness. When arriving to the racetrack, simply turn the golden knob clockwise to set the damper in race mode. This action changes all four areas of the damper: low- and high-speed compression and rebound damping.\u003c\/p\u003e\u003cp\u003eWith Öhlins’ Road \u0026amp; Track coilovers, you’ll experience blistering response times, improved bump absorption, and a massive amount of traction to increase the safety of the car when you’re pushing it to the limit. The car will be easier to balance on the edge of what the tires can handle before losing grip. You will also be faster and more agile on track. The internal DFV components react quickly to major and minor road imperfections, keeping you in control of the car and in contact with the track surface.\u003c\/p\u003e\u003cp\u003eWhen driving to and from the track, set the dampers back into road mode for a more relaxed and comfortable drive, experiencing more grip and quicker response time than ever before.\u003c\/p\u003e\u003cp\u003eFeatures\u003c\/p\u003e\u003cp\u003eGENERAL FEATURES:\u003c\/p\u003e\u003cp\u003eDFV technology (Dual Flow Valve)\u003c\/p\u003e\u003cp\u003e1-way 25 click compression and rebound adjuster\u003c\/p\u003e\u003cp\u003eIndividual height adjustment\u003c\/p\u003e\u003cp\u003eRebuildable dampers for custom tuning\u003c\/p\u003e\u003cp\u003eCorrosion salt spray tested (ISO 9227)\u003c\/p\u003e\u003cp\u003e2-year warranty\u003c\/p\u003e\u003cp\u003eTÜV approved\u003c\/p\u003e\u003cp\u003eFRONT FEATURES:\u003c\/p\u003e\u003cp\u003eMcPherson strut, monotube upside-down technology\u003c\/p\u003e\u003cp\u003eSpring preload adjuster\u003c\/p\u003e\u003cp\u003eSeparate damper length adjuster\u003c\/p\u003e\u003cp\u003eApproximately 0-20 mm lowering adjustment range\u003c\/p\u003e\u003cp\u003eSpring rate 70 N\/mm\u003c\/p\u003e\u003cp\u003eUse with original top mounts\u003c\/p\u003e\u003cp\u003eREAR FEATURES:\u003c\/p\u003e\u003cp\u003eAluminum monotube shock absorber\u003c\/p\u003e\u003cp\u003eSpring preload adjuster\u003c\/p\u003e\u003cp\u003eSeparate damper length adjuster\u003c\/p\u003e\u003cp\u003eApproximately 0-20 mm lowering adjustment range\u003c\/p\u003e\u003cp\u003eSpring rate 140 N\/mm\u003c\/p\u003e\u003cp\u003eUse with original top mounts\u003c\/p\u003e\u003cp\u003eOptional accessories: PASM cancellation (+$650.00). Select the required configuration.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 992 Carrera, S, GTS, T and Turbo\/S as titled by RSS. Uses original top mounts.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Standard \/ no extras","offer_id":56211820970306,"sku":"POS MU10S1","price":4800.0,"currency_code":"USD","in_stock":true},{"title":"PASM cancellation","offer_id":56211821003074,"sku":"POS MU10S1+35020-07","price":5450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-11.jpg?v=1789871444"},{"product_id":"ohlins-pasm-cancellation-kit-981-982-991-992-excl-gt2-gt3-gt4","title":"Ohlins PASM Cancellation Kit - 981\/982\/991\/992 (Excl. GT2\/GT3\/GT4)","description":"\u003cp\u003eSupplier part number: 35020-07. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eOhlins PASM Cancellation Kit - 981\/982\/991\/992 (Excl. GT2\/GT3\/GT4)\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 981, 982\/718, 991 and 992; excludes GT2, GT3 and GT4.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211821166914,"sku":"35020-07","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-12.webp?v=1789871450"},{"product_id":"sharkwerks-sport-exhaust-992-2-carrera-t-s","title":"Sharkwerks Sport Exhaust 992.2 Carrera T\/S","description":"\u003cp\u003eSupplier part number: SHAX992_2SPORT. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eHand-crafted in Northern California, our stainless steel Sport Exhaust for the 992.2 Carrera, T, \u0026amp; S (including PSE - Porsche Sport Exhaust equipped cars). gives the car a more exotic and pronounced sound than the factory or Sports exhaust options, without check engine lights or modifying the original electronic sport exhaust valves. Fits 992.2 Carrera, Carrera S, T but NOT for the GTS .\u003c\/p\u003e\u003cp\u003eThis system is still what we would consider worthy of our SPORT moniker and delivers a richer tone and fun sound without being over-bearing. Great for a starting point or daily driver.\u003c\/p\u003e\u003cp\u003eFeatures 3 inch tubing and a proper-flowing X-merge to keep things more in line for a daily driven car or road trips. When used with factory cats\/OPF's there is no noticeable drone in any gear \/ RPM and it can maintain highway speeds without drone while cruising as well.\u003c\/p\u003e\u003cp\u003eThe car will have a noticeable sporty sound at wide open and partial throttle and multiplies turbo whistling sounds and overrun (in Sport mode).\u003c\/p\u003e\u003cp\u003eThis system re-uses the original emissions equipment and tailpipes without cutting or welding, so it's completely reversible. This means the system is simpler to install, and won't trigger check engine lights or problems at inspections. As a bonus it is also 15 pounds lighter than the stock muffler\/exhaust it replaces.\u003c\/p\u003e\u003cp\u003eSince we found with testing that the exhaust valve system has a mind of its own and rarely does what you want even with the Sport button, we opted to build brackets that secure the original valves in place without allowing them to control the exhaust, so the valved exhaust system no longer functions with our Sport Exhaust installed . This delivers a more linear \/ clean and consistent sound vs valves flapping open\/closed throuighout a single pull across the RPM range.\u003c\/p\u003e\u003cp\u003eThe exhaust includes all required installation hardware. Prototype shown installed:\u003c\/p\u003e\u003cp\u003eSporty tone, without drone at 60-80 MPH while maintaining speed\u003c\/p\u003e\u003cp\u003e50-State Emissions Legal (does not effect \"smog\" or emissions equipment) and will not cause check engine lights\u003c\/p\u003e\u003cp\u003e50 % weight reduction vs stock - saves 15 pounds of weight off the back of the car vs stock\u003c\/p\u003e\u003cp\u003eMade in the USA from locally sourced Stainless Steel\u003c\/p\u003e\u003cp\u003eRe-uses original exhaust tips - no need to cut or modify and completely reversible\u003c\/p\u003e\u003cp\u003eExpected minor power gains, and weight savings, and faster turbo spool-up\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 992.2 Carrera, Carrera S and Carrera T, including PSE. Excludes GTS.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211821232450,"sku":"SHAX992_2SPORT","price":2195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-13.jpg?v=1789871459"},{"product_id":"shark-werks-sport-2-5-exhaust-for-992-carrera-s-t-gts-turbo","title":"Shark Werks Sport (2.5\") Exhaust for 992 \/ Carrera \/ S \/ T \/ GTS \/ Turbo","description":"\u003cp\u003eSupplier part number: Shax000. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eShark Werks 2.5 Sport Exhaust for all 992 models (Carrera, S, T, GTS and Turbo) gives the car a more exotic and pronounced sound than the factory or Sports exhaust options, without check engine lights or modifying the original electronic sport exhaust valves. Fits 992 Carrera, Carrera S, GTS, and 992 Turbo and Turbo S models. If you are looking for an even more aggressive sound we recommend using our 3 inch Race Exhaust .\u003c\/p\u003e\u003cp\u003eThis system is still what we would consider \"loud and aggressive\", and features 2.5 inch tubing to keep things more in line for a daily driven car or road trips. Some drone can still be induced at various speeds depending on which gear \/ RPM and how much throttle is used; however it can maintain highway speeds without drone while cruising.\u003c\/p\u003e\u003cp\u003eThe car will have a noticeable, louder bark on cold start and slightly louder when idling once warmed up, will be more aggressive at wide open and partial throttle and multiplies turbo whistling sounds and overrun (in Sport mode).\u003c\/p\u003e\u003cp\u003eThis system re-uses the original emissions equipment and tailpipes without cutting or welding, so it's completely reversible. This means the system is simpler to install, and won't trigger check engine lights or problems at inspections.\u003c\/p\u003e\u003cp\u003eSince we found with testing that the exhaust valve system has a mind of its own and rarely does what you want even with the Sport button, we opted to build brackets that secure the original valves in place without allowing them to control the exhaust, so the valved exhaust system no longer functions with our Sport Exhaust installed .\u003c\/p\u003e\u003cp\u003eThe exhaust includes all required installation hardware and instructions.\u003c\/p\u003e\u003cp\u003eSporty tone, without significant drone at 60-80 MPH while maintaining speed (though may have drone at various RPM\/speeds)\u003c\/p\u003e\u003cp\u003e50-State Emissions Legal (does not effect \"smog\" or emissions equipment) and will not cause check engine lights\u003c\/p\u003e\u003cp\u003eMade in the USA from locally sourced Stainless Steel\u003c\/p\u003e\u003cp\u003eRe-uses original exhaust tips - no need to cut or modify and completely reversible\u003c\/p\u003e\u003cp\u003eExpected minor power gains, and weight savings, and faster turbo spool-up\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 992 Carrera, S, T, GTS, Turbo and Turbo S; 2.5-inch sport exhaust.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211821625666,"sku":"Shax000","price":1845.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-18.jpg?v=1789871491"},{"product_id":"soul-performance-exhaust-porsche-992-carrera-x-pipe","title":"Soul Performance Exhaust - Porsche 992 Carrera X-Pipe","description":"\u003cp\u003eSupplier part number: POR.992.XP. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003ePorsche 992 Carrera X-Pipe Exhaust System\u003c\/p\u003e\u003cp\u003eOur modular non-valved X-Pipe Exhaust for the 992 Carrera delivers smooth, rich flat-six sound throughout the rev range, whether you intend to upgrade your catted components or leave the rest of the OEM system in place.\u003c\/p\u003e\u003cp\u003eDETAILS\u003c\/p\u003e\u003cp\u003e+ Fits all Porsche 992 Carrera models\u003c\/p\u003e\u003cp\u003e+ Valve Simulator Brackets included to eliminate Check Engine Light\u003c\/p\u003e\u003cp\u003e+ All SOUL Performance Products exhaust components are backed by the industry’s first and finest Lifetime Warranty for both street and track use\u003c\/p\u003e\u003cp\u003e+ Designed and built in-house at our Willow Grove, PA facility\u003c\/p\u003e\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eDEVELOPMENT: To supplement our extensive portfolio of 992 products, we are excited to announce a plug-and-play X-Pipe Exhaust System for Carrera and Turbo models, pairing with the factory catted components or any aftermarket components designed to meet the OEM rear muffler. Even on its own, this modular upgrade nets a number of immediate benefits.\u003c\/p\u003e\u003cp\u003eBy replacing the stock valved muffler with our non-valved x-pipe, the sound profile is immediately enhanced throughout the rev range as we are now able to circumvent the factory valve programming that progressively opens through about 5K RPM—now, when paired with our Valve Delete Modules, that sound is readily available from a stop and without a tune.\u003c\/p\u003e\u003cp\u003eOther muffler replacements that simply use smaller tubing for a valves-closed flow path may deliver more low-end sound, but struggle to balance the two conditions. Opening and closing does not provide enough of an effective delta especially with factory catted components thus rendering it mostly ineffective and expensive. Our cost-conscious x-pipe system produces a reasonable tone for low-speed operation while also maximizing sound at the top of the rev range as there is not a secondary flow path harvesting residual exhaust flow. As a result, we are able to extract the most sound level possible, whether customers are intending to compound the results with other upgraded components or simply leave the factory cats in place.\u003c\/p\u003e\u003cp\u003eDespite its simplicity, our x-pipe is anything but a straight-through design. It is developed from our Performance Exhaust System but is tailored to meet all OEM connection points whereas the former system is exclusively produced as a package. The resonated x-pipe delivers a rich, smooth, high-pitched sound with limited drone, owing to our extensive development process to manufacture a sophisticated but uncomplicated design for all turbocharged 992 customers—whether their end goals are within reach or are much loftier.\u003c\/p\u003e\u003cp\u003eCONSTRUCTION: Each set is assembled in house in the USA out of mandrel bent, thick wall .065″” T304L stainless steel. Back purged TIG welding (with ARCAL™ Prime argon gas ) ensures proper weld penetration and longevity – crucial for durability on the track. Water jet cut exhaust flanges are made to ISO 9001:2015 standards with tolerances of +\/- 0.003 inches for extreme precision. We fabricate these systems using thick gauge aluminum fixtures which act as a great heat sink during the welding process and prevent warping not only of our products, but the fixtures themselves to ensure perfect fitment.\u003c\/p\u003e\u003cp\u003eLIFETIME WARRANTY: Enjoy your SOUL exhaust components with confidence on both the street and track as they are covered by our Lifetime Warranty ! Our team will quickly work with you to resolve any issues or answer any questions that you may have.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 992 Carrera models; retain compatible factory or factory-style catalytic components.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211821887810,"sku":"POR.992.XP","price":2995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-23.jpg?v=1789871548"},{"product_id":"shark-werks-race-exhaust-for-992-carrera-s-turbo","title":"Shark Werks - Race Exhaust for 992 \/ Carrera \/ S \/ Turbo","description":"\u003cp\u003eSupplier part number: X000. Vendor: RSS (Road Sport Supply).\u003c\/p\u003e\u003cp\u003eOur Race Exhaust for 992 gives the car a much more aggressive and louder tone than standard or Sports exhaust options, without check engine lights or modifying the original electronic sport exhaust valves. Fits 992 Carrera, Carrera S, GTS, and 992 Turbo and Turbo S models. If you are looking for a more moderate sound with valves we recommend using the Tubi System\u003c\/p\u003e\u003cp\u003eThe sound of this system is what we consider \"loud and aggressive\", and features 3\" tubing, but does have some drone at various speeds depending on which gear \/ RPM and how much throttle is used; however it can maintain highway speeds without drone while cruising.\u003c\/p\u003e\u003cp\u003eThe car will have a noticeable, louder bark on cold start and slightly louder when idling once warmed up, will be more aggressive at wide open and partial throttle and multiplies turbo whistling sounds and overrun (in Sport mode).\u003c\/p\u003e\u003cp\u003eThis system re-uses the original emissions equipment and tailpipes without cutting or welding, so it's completely reversible. This means the system is simpler to install, and won't trigger check engine lights or problems at inspections.\u003c\/p\u003e\u003cp\u003eSince we found with testing that the exhaust valve system has a mind of its own and rarely does what you want even with the Sport button, we opted to build brackets that secure the original valves in place without allowing them to control the exhaust, so the valved exhaust system no longer functions with our Sport Exhaust installed .\u003c\/p\u003e\u003cp\u003eThe exhaust includes all required installation hardware and instructions.\u003c\/p\u003e\u003cp\u003eLouder, aggressive tone, without significant drone at 60-80 MPH while maintaining speed (though may have drone at various RPM\/speeds)\u003c\/p\u003e\u003cp\u003e50-State Emissions Legal (does not effect \"smog\" or emissions equipment) and will not cause check engine lights\u003c\/p\u003e\u003cp\u003eMade in the USA from locally sourced Stainless Steel\u003c\/p\u003e\u003cp\u003eRe-uses original exhaust tips - no need to cut or modify and completely reversible\u003c\/p\u003e\u003cp\u003eExpected minor power gains, and weight savings, and faster turbo spool-up\u003c\/p\u003e\u003cp\u003eThis is a LOUD EXHAUST. Please keep this in mind prior to ordering.\u003c\/p\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003ePorsche 992 Carrera, S, GTS, Turbo and Turbo S; 3-inch race exhaust.\u003c\/p\u003e","brand":"RSS","offers":[{"title":"Default Title","offer_id":56211821953346,"sku":"X000","price":2185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/files\/rss-rest-25.jpg?v=1789871560"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0986\/4930\/9506\/collections\/ICON_LG_992_6d72204b-207f-4fcb-a42a-ecb533fc3ffd.png?v=1789757470","url":"https:\/\/levinsonperformance.com\/collections\/rss-992-911-2019.oembed","provider":"Levinson Performance \u0026 Mfg.","version":"1.0","type":"link"}